You are browsing camaro6 
05-09-2025, 07:32 PM
|
#1 |
 Drives: 2018 1SS 1LE Join Date: Aug 2024
Location: Orlando, FL
Posts: 13
|
Side emblem removal - outline of emblem
2018 SS 1LE Summit White
I removed the side emblems on the front panels - the camaro shield with the red/white/blue. After I removed the emblem and cleaned up the area, there is a very noticeable ridge where the emblem resided. It almost looks like the fender was clear coated with the emblems still attached. Wondering if anyone has seen this before and/or could offer any advice. If it cannot be fixed, then I'll reapply the side emblems. Thanks! |
|
|
|
05-09-2025, 08:55 PM
|
#2 |
 Drives: Camaro SS 1LE M6 Join Date: Feb 2024
Location: Las Vegas
Posts: 353
|
What products have you tried on it so far?
__________________
2018 Camaro SS 1LE M6
Stainless Works Headers & X pipe | Redline Axleback | E85 | Rotofab | Soler Ported TB | LT2 Manifold  |
|
|
|
05-09-2025, 11:29 PM
|
#3 | |
|
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,688
|
Quote:
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Fender Badge, Footwell Lighting
After delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Pedals, SS Wheel Caps, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF-Full Front & Rockers, 35% Tint, CeramicPro coated, RST Stainless Brake Lines, Castrol SRF, MSD Plug Wires, Mamo V3 Ported TB Left: My "fun" ride (455 HP). Right: My "work" ride (52,000 HP): a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph. BOTH AWESOME to operate...  |
|
|
|
|
|
05-10-2025, 08:33 AM
|
#4 |
|
Drives: 2018 1SS 1LE Join Date: Aug 2024
Location: Orlando, FL
Posts: 13
|
I hit the area with Meguiar's M10508 and my Griots polisher.
I am not the original owner. I'm leaning toward the panels being recleared (or repainted/recleared) without removing the emblems. |
|
|
|
|
05-10-2025, 01:57 PM
|
#5 | |
|
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,688
|
Quote:
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Fender Badge, Footwell Lighting
After delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Pedals, SS Wheel Caps, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF-Full Front & Rockers, 35% Tint, CeramicPro coated, RST Stainless Brake Lines, Castrol SRF, MSD Plug Wires, Mamo V3 Ported TB Left: My "fun" ride (455 HP). Right: My "work" ride (52,000 HP): a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph. BOTH AWESOME to operate... |
|
|
|
|
|
05-21-2025, 07:29 AM
|
#6 |
|
Drives: 2024 Camaro 1SS Join Date: Mar 2024
Location: Minnesota
Posts: 341
|
You could always use some high grit paper and repolish. I have some 15000 grit, will not leave visible scratches, but still need to polish after.
|
|
|
|
|
05-21-2025, 08:25 AM
|
#7 |
 
Drives: White 2024 1SS M6 Join Date: Nov 2023
Location: PA
Posts: 183
|
Were both fenders the same way ? Did you also remove the rear bumper emblem? I removed the fender emblems as well as the rear SS emblem and replaced them all with black/chrome SS logos. They all came of pretty easily, but left a little glue residue behind that I removed with Goof-off. Any chance it's just glue residue ?
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
