[2018zl1-1le]

I’m looking to set up my banks gauges and would like to know what the readings for what’s normal and what’s too high.
For oil temp, intake manifold temp, pretty much what are the ranges for any of the sensors that I can monitor and which ones if too high will pull timing?
Not sure if they’re any lists out there so I can set the warnings on the gauges
Better safe than sorry
Thanks for any help or links to that information
This is on a 2018 zl11le 6m

[SOCAL.M6.ZLE]

Originally Posted by 2018zl1-1le

I’m looking to set up my banks gauges and would like to know what the readings for what’s normal and what’s too high.
For oil temp, intake manifold temp, pretty much what are the ranges for any of the sensors that I can monitor and which ones if too high will pull timing?
Not sure if they’re any lists out there so I can set the warnings on the gauges
Better safe than sorry
Thanks for any help or links to that information
This is on a 2018 zl11le 6m

Congrats on getting the iDash...
Off the top of my head, I have mine set up as follows...

Alerts:
Oil Pressure - Below 25psi
Oil Temps - Above 250F
Engine Coolant - Above 235F
IAT.3 - Above 155F
RPM Shift Light - 6,800rpm
Low Side Fuel Pressure - Below 50psi

Hope this helps.

[2018zl1-1le]

Thanks that’s what I was thinking of.