|
|
#1 |
|
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,853
|
WTB: ZL1 Exhaust - Complete, Uncut - NJ
Assuming they are all the same, if not, please note that it must fit 2018+ ZL1.
From my understanding, piping and muffler is all same for SS quad exit, but those have smaller tips. Might consider that can just tack on tips from my current exhaust if it comes to that. Have TIG, will weld. Within 2 hours of North NJ preferred... no shipping as goddam thing is HUGE! In good condition, as close to stock OEM as possible. NPP must be functional. PM w details, pics if available and location.
__________________
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ Last edited by Vtor_ZL1; 10-06-2024 at 05:25 PM. |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,429
|
Inspection time?
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
#3 |
|
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,853
|
Nah.. ran over something on highway n mangled it a bit.
Found one couple of hours away.. should have it here Sunday to swap out.
__________________
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
|
|
|
|
|
|
|
|
Post Reply
|
|
|