Longtube Headers with Corsa

Summit20171SS · 07-21-2023, 07:12 AM

If I were to install long tube headers without cats, do they make a kit that will bolt it up to my existing 3" Corsa extreme exhaust?

Thank you

FlukeSS · 07-21-2023, 08:12 AM

I have 2" LT headers on my car, catless. So I would say yes. I guess it would depend on which headers you get. I know Speed Engineering will bolt up to 3" X-Pipes

Summit20171SS · 07-21-2023, 01:31 PM

Quote:

Originally Posted by FlukeSS

I have 2" LT headers on my car, catless. So I would say yes. I guess it would depend on which headers you get. I know Speed Engineering will bolt up to 3" X-Pipes

Ok cool, I plan on going with either Kooks or American Racing.

easttxss · 07-21-2023, 01:57 PM

The trick these days is finding the parts to do the 'catless' part. I don't think any of the header companies make an off-road option anymore. Also, don't overlook StainlessWorks. They make a very nice header too.

Summit20171SS · 07-21-2023, 06:12 PM

Quote:

Originally Posted by easttxss

The trick these days is finding the parts to do the 'catless' part. I don't think any of the header companies make an off-road option anymore. Also, don't overlook StainlessWorks. They make a very nice header too.

Oh wow I didn't realize that no one makes that setup anymore, but thank you Ill have to check out stainless works, how is the fitment on them?

07-21-2023, 07:12 AM	#1
Summit20171SS Drives: 2017 1SS M6 Join Date: Jul 2023 Location: North Carolina Posts: 124	Longtube Headers with Corsa If I were to install long tube headers without cats, do they make a kit that will bolt it up to my existing 3" Corsa extreme exhaust? Thank you __________________ 2017 1SS M6 ~ Air Raid Cold Air Intake~ ~ 3" Corsa Extreme Catback Exhaust ~

07-21-2023, 08:12 AM	#2
FlukeSS Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018 Location: Here Posts: 1,447	I have 2" LT headers on my car, catless. So I would say yes. I guess it would depend on which headers you get. I know Speed Engineering will bolt up to 3" X-Pipes __________________ 2020 Camaro 2SS A10 \| Rebuilt by: CBI Street Cars \| 2" SE LT Headers \| 3" SE X-Pipe \| 3" MBRP Axle-Back \| Pri & Sec Cat Deletes \| Roto-Fab CAI \| LT2 Ported \| 95mm ZR1 TB \| LSA crankshaft conversion w/modified crank gear \| LS1 thrust bearing \| LS MSD Plug Wire Set \| BTR Stage I Cam \| ARP Rod Bolts \| Delphi Lifter set \| NGK LTR71X-11 spark plug set \| DOD Delete \| VVT Limiter \| ECM, TCM & E85 \| Retuned by: Justin L. \| Dyno: 510 rwhp 472 rwtq \| Best 1/4 Time: 11.639

07-21-2023, 01:57 PM	#4
easttxss Drives: '16 2SS M6 Join Date: Aug 2019 Location: Hughes Springs, TX Posts: 322	The trick these days is finding the parts to do the 'catless' part. I don't think any of the header companies make an off-road option anymore. Also, don't overlook StainlessWorks. They make a very nice header too. __________________ David '16 2SS M6 black on black, SW long tube full exhaust, NPP, Roto-fab CAI, ported stock TB '16 2SS M6 black w/Metallic black stripes, Kalahari, 6 piston front (totaled 1/22/20) '14 Fusion Titanium 2.0T '83 Jeep Wagoneer

User Name		Remember Me?
Password