You are browsing camaro6 
02-18-2023, 04:11 PM
|
#1 |
 
Drives: 2018 ZL1 Garnet Red A10 Join Date: Mar 2015
Location: Nashville, Tennessee
Posts: 151
|
Help finding this part (PCV hose fitting)
Just bought an '18 ZL1. Car came with a K&N intake on it. I bought a stock intake off another member to put back on the car, and that all went fine except the stock elbow didn't have the fitting for the PCV hose to clip on.
I was able to re-use the one from the K&N...its threaded and I was able to just thread it into the rubber. But, I'm selling the K&N and a buyer is probably going to want all the parts. So I need to find a part number for the OEM fitting or another fitting that will work. Here's the part in red (but for the stock elbow):
__________________
2018 ZL1 Red Hot A10 (SOLD 1/21)
2001 Corvette Z06 Quicksilver Heads/Cam/Longtubes 443rwhp (SOLD 5/23) 2018 ZL1 Garnet Red A10 (SOLD 4/25) 2003 Corvette Z06 Torch Red bone stock 60k mi |
|
|
|
02-18-2023, 04:43 PM
|
#2 |
|
Drives: 2018 ZL1 Garnet Red A10 Join Date: Mar 2015
Location: Nashville, Tennessee
Posts: 151
|
__________________
2018 ZL1 Red Hot A10 (SOLD 1/21)
2001 Corvette Z06 Quicksilver Heads/Cam/Longtubes 443rwhp (SOLD 5/23) 2018 ZL1 Garnet Red A10 (SOLD 4/25) 2003 Corvette Z06 Torch Red bone stock 60k mi |
|
|
|
|
02-23-2023, 02:43 PM
|
#3 |
|
Drives: 2018 ZL1 Garnet Red A10 Join Date: Mar 2015
Location: Nashville, Tennessee
Posts: 151
|
That didn't work, too small (what I get for not measuring). But this worked perfectly: https://www.amazon.com/dp/B087Z42B6P...roduct_details
__________________
2018 ZL1 Red Hot A10 (SOLD 1/21)
2001 Corvette Z06 Quicksilver Heads/Cam/Longtubes 443rwhp (SOLD 5/23) 2018 ZL1 Garnet Red A10 (SOLD 4/25) 2003 Corvette Z06 Torch Red bone stock 60k mi |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
