You are browsing camaro6 
06-12-2022, 07:15 PM
|
#1 |
 Drives: 2017 Camaro 2SS Convertible Join Date: Jun 2022
Location: VA
Posts: 1
|
Need help!
Hi. I need some help. I removed the right cylinder head to verify that cylinder #6 is bad on my 2017 2SS. Unfortunately, it’s toast. A piece of the porcelain on the spark plug broke off and wreaked havoc in the cylinder. I’m putting it back together and need to figure out how to start tightening down the rockers. I believe you normally start with cylinder #1 at TDC but I didn’t remove the left head therefore can’t see it. What positions should I look for in the cylinders in the right bank when #1 is TDC? Thanks.
|
|
|
|
06-14-2022, 02:45 PM
|
#2 |
 
|
I'm not sure I'd rely on the positions of other cylinders to find and verify TDC. I found a link for using the timing marks to make sure you are dead on.
https://gm-techlink.com/?p=11287
__________________
2021 LT1, A10, RotoFab CAI, Flowmaster American Thunder axle back exhaust, JLT catch can, Katzkin leather interior.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
