03-20-2021, 11:16 AM | #1 |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 821
|
Recommended Mods (other than obvious mods)
So I an new to the Camaro world, just getting a used 2017 2SS.
Other than the normal and obvious mods (intake, headers), what other mods are recommended? (I am thinking I may get a Rotofab and stick with stock exhaust for now). I will likely black-out the chrome strips on the front bumper. Anyone have a link to a How-To for that? I already found a How-To for more seat recline and will definitely be doing that. Probably going to get a Mishimoto catch can as well. Anything else? |
03-20-2021, 11:19 AM | #2 |
Account Suspended
Drives: '21 Wild Cherry ZL1 Join Date: Aug 2018
Location: WI
Posts: 2,082
|
Catch can you say?
Oh boy, you kicked a hornets nest there. |
03-20-2021, 11:22 AM | #3 | |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,614
|
Quote:
Custom valve train PP heads FII blower spacer plates & thermal reduction blanket Kong ported blower/snout NW 103mm ported TB Griptec snout pulley ( 2.4) 10% lower pulley MMS catch can, mild DSX low side pump Kooks Long tubes and Hi-flow cats Custom heat exchangers RotoFab
__________________
'20 ZL1 1LE A10.
LME 390, E2650, FBO, 100 oct. Not a DD. Last edited by JSH; 03-20-2021 at 12:46 PM. |
|
03-20-2021, 11:42 AM | #4 |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 821
|
I heard (from the interwebs) that a catch can will add 150 HP.
There are usually model specific mods/fixes to fix or improve usability for almost any car. That is mainly what I am looking for. So something like moding the seats for more recline angle is a perfect example. I may get a rear seat delete also. Just never saw why either the Camaro or Mustang had rear seats that are basically unusable. A set of ACS composites rock/splash guards is also likely. As for more extensive mods such as heads, cam, supercharger, etc., I don't think I want to do that. I modified my C6 GS with supercharger, clutch, headers, etc. It is a rabbit hole that you can go down a long way; looking to avoid that with this car. |
03-20-2021, 12:38 PM | #5 |
Account Suspended
Drives: '21 Wild Cherry ZL1 Join Date: Aug 2018
Location: WI
Posts: 2,082
|
All good stuff.
The big thread of mods is a treasure trove of stuff you can do. |
03-20-2021, 02:50 PM | #6 | |
Drives: 2016 Camaro SS Join Date: Jan 2019
Location: Florida
Posts: 305
|
Quote:
__________________
2016 Gloss Black Camaro 1SS, A8, MRC, 6-Piston BBK
Whipple, LT4 fueling, AlkyControl, Kooks, Borla, Roto Fab, Mightymouse, aFe, Apex, C7 Carbon, etc... |
|
03-20-2021, 02:53 PM | #7 | |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 821
|
Quote:
|
|
03-20-2021, 09:15 PM | #8 |
Somewhere in the Kalahari
Drives: 2021/18 (de-fresh) 3LT RS Join Date: Dec 2017
Location: California
Posts: 665
|
Thanks for the lead on that! After I had paint correction done, I always used the emergency release handle to close the trunk on my 2016 1LT. However, the struts on the trunk of my 2021 3LT offer a lot more resistance, and the emergency release handle didn't seem up to that task. This pull strap looks like it will be a perfect alternative!
|
03-20-2021, 11:12 PM | #9 |
Drives: 2018 Chevrolet Camaro 2SS 1LE 6M Join Date: Jul 2019
Location: California
Posts: 283
|
The updated flux capacitor from Acme is good for 100 additional HP.
__________________
Bolt-ons.
|
03-21-2021, 02:37 AM | #10 |
Drives: 2018 Camaro SS Join Date: Jan 2021
Location: Washington
Posts: 577
|
Hydraulics, gold pin stripping and underglow!
Also for real black out lenses in side and rear reflectors Sent from my iPhone using Tapatalk |
03-21-2021, 09:31 AM | #11 |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 821
|
|
|
|
Post Reply
|
|
|