11-17-2020, 08:54 AM | #1 |
Drives: 2018 ZL1 Join Date: Aug 2020
Location: pacific Northwest
Posts: 16
|
ECM flash
Has anyone ever had a chevrolet dealer re-flash the ECM to get rid of the bog/stutter when leaving a stop light.
|
11-17-2020, 09:20 AM | #2 |
Petro-sexual
|
Is there a reflash I missed?...
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
11-17-2020, 10:43 AM | #3 |
Drives: ‘18 ZL1 / ‘22 ZLE Join Date: Oct 2013
Location: PA
Posts: 586
|
They did this to my car after explaining the bog situation. I’m picking it up today so I’ll let you guys know if there’s any difference
|
11-17-2020, 12:08 PM | #4 |
Drives: 2017 Bright Yellow ZL1 6spd Join Date: May 2010
Location: Central MA
Posts: 643
|
I don't believe there is any ECM update for this. It was explained by Al O in the following thread.
https://www.camaro6.com/forums/showthread.php?t=520373
__________________
2017 ZL1 Bright Yellow w/ black center stripe, 6 speed, CF gas door, PDR, Navi
|
11-17-2020, 01:15 PM | #5 |
Drives: 2018 ZL1 Join Date: Aug 2020
Location: pacific Northwest
Posts: 16
|
stumble/bog
Ok, heres the question. I don't care about launching from some street or drag strip. Al, the question is when you pull up to a stop sign and just want to take off nice and smooth.I get an stumble as the clutch engages the engine seems to loose power instead of easily taking off. I've even had it die a couple times. There has to be an issue with the ECM or something that is cutting back power instead of slightly increasing the fuel/timing as the car engages. I have tried a different throttle body which made no difference.
|
11-17-2020, 01:24 PM | #6 |
Drives: 2018 ZL1 Join Date: Aug 2020
Location: pacific Northwest
Posts: 16
|
ssallday it would be great to hear how your car does after the you drive it a few miles Maybe you can tell us what they did also. Thanks
|
11-17-2020, 03:04 PM | #7 |
Drives: ‘18 ZL1 / ‘22 ZLE Join Date: Oct 2013
Location: PA
Posts: 586
|
I just want to say that my issue is completely related to takeoffs. I don’t launch the car so I’m not worried if it bogs down when dumping the clutch. It was difficult to decide how much gas/clutch to use when taking off. Often, I would give it too much gas because I didn’t want the car to stall. I’m sure that most of you with this issue have done the same thing. After the ECM update, the car is noticeably smoother. I don’t have to use as much gas to get it going and the car doesn’t jump nearly as much when the clutch engages. I can’t say that 100% of the bog is gone. I’m so used to giving it a lot of gas due to the bogging issue so it may take time to adjust. Overall, I don’t have to leave my foot on the clutch as long or give it a ton of gas for takeoffs. I strongly recommend you guys to bring your cars in for this ECM software update
Side note: I had to put my stock air box on for the warranty work so it might improve even more once I put the roto-fab back on the car. |
11-17-2020, 04:24 PM | #8 |
Drives: 2018 ZL1 Join Date: Aug 2020
Location: pacific Northwest
Posts: 16
|
ssallday you don't happen to know the update bulletin or a Update number connected to it ?
|
11-17-2020, 05:17 PM | #9 |
Drives: ‘18 ZL1 / ‘22 ZLE Join Date: Oct 2013
Location: PA
Posts: 586
|
They didn’t put a number on the service sheet. It says “ECM update”
|
11-17-2020, 06:36 PM | #10 |
Drives: 2018 ZL1 Join Date: Aug 2020
Location: pacific Northwest
Posts: 16
|
I see a service update buuletin number on there i will see where that goes.
Russ |
11-17-2020, 06:37 PM | #11 |
Drives: 2021 Camaro LT1 Join Date: Sep 2020
Location: Tampa FL area
Posts: 801
|
A after market tune will fix it but the warranty is gone if you do that. A ported TB helps. Or a pedal controller. I find the lag much less on my 2021 LT1 than i did on my 2019 C7.
|
11-17-2020, 07:28 PM | #12 |
ZL1 Believer
Drives: 2019 Camaro ZL1 Join Date: Oct 2020
Location: Bangkok, Thailand
Posts: 536
|
Is this issue with a manual Tranny only?
|
11-17-2020, 08:04 PM | #13 | |
Drives: ‘18 ZL1 / ‘22 ZLE Join Date: Oct 2013
Location: PA
Posts: 586
|
Quote:
It might be for both but Im not sure. I think most people who have this issue own a manual |
|
11-22-2020, 10:23 PM | #14 |
ZL1 Believer
Drives: 2019 Camaro ZL1 Join Date: Oct 2020
Location: Bangkok, Thailand
Posts: 536
|
OK, I will be looking out for this as soon as I start to drive her. Let the countdown begin..... Day 10
|
|
|
Post Reply
|
|
|