You are browsing camaro6 
12-17-2020, 10:07 PM
|
#1 |
 
Drives: 2017 SS 6sp Join Date: Jun 2014
Location: Carrollton texas
Posts: 323
|
stroker
who makes or puts together the best stroker motor? i know their are a lot of builds out there but who does the best details takes the time to do it right everything the motor thats going to live 8 to 9 thousand rpm.
|
|
|
|
12-17-2020, 10:37 PM
|
#2 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
Vengeance racing, Texas Speed, Late Model Racing, GPI. Lots of shops. Don't think you need to turn these motors 9000 rpms. Typically shorter stroke motors are better for turning higher rpms, such as a destroked small block. Most really bad ass LT motors probably don't exceed 7500. I ran a small block back in the 80s that had the best shit you could buy back then and we built it to turn 8800 and that thing screamed on alcohol but it still had its limits being a pushrod motor. The Copo's are turning those motors 9700 or higher, 350 cubed Ls7 with a Magnuson 2650 and they are upwards to $50,000 motors that make 1400 hp. Good luck on your build.
Last edited by laynlo15; 12-17-2020 at 10:51 PM. |
|
|
|
|
12-17-2020, 10:47 PM
|
#3 |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,198
|
Late Model Engines is tops IMO. Katech is good too.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
