[iosigma]

Hey guys,
I recently did the IKON motorsports ZL1 bumper conversion. I also bought the Foglight/drl's that have the turn signal built in. I thought they would come with a wiring diagram, but they did not. Has anyone done this install and can share their process or give me some pointers? The light included two pigtail harness and both lights have a signal wire coming out of the back of the housing. I am assuming that's a trigger for the signal splice, but I am unsure and don't want to go t-tapping and splicing wires without some direction. Any advice is greatly appreciated!

[iosigma]

Update! I got them to work. The drl's come with two extra sets of pigtails and a pair of yellow wires. I took the extra yellow wire and tapped into the turn signal wires and ran a single yellow wire to the yellow trigger wire on the back of the drl housing. When the signal lights are activated, it causes the drl to switch from amber to bright white.