02-25-2019, 08:19 PM | #1 |
Drives: 2019 zl1 1le Join Date: Jan 2019
Location: Buffalo, NY
Posts: 188
|
jack stands for a week
I need to leave my car on jack stands for a week to do the ceramic coating on the wheels. I just took out my zl1 add-on mag pads but they say don't use with jack stands. So does anyone have any suggestions?
https://zl1addons.com/collections/ja...-3-jack-magpad
__________________
2018 GMC Denali 6.2L
2019 Camaro ZL1 1LE 6 speed Riverside Blue 1LE NAV PDR. PPF entire car |
02-25-2019, 09:57 PM | #2 |
2018 ZL1 1LE
Drives: 2018 ZL1 1LE Join Date: Aug 2017
Location: Westfield, IN
Posts: 1,010
|
Mag Pads are used for lifting the car with a hydraulic floor jack. Once the car is lifted, then you place jack stands under the pinch welds. If you are planning on leaving hydraulic floor jacks only under your car as a means of supporting the weight of the car for a week, Mag Pads may not be sufficient for support due to the puck material not being able to sustain the weight for a prolonged period of time.
|
02-26-2019, 03:28 AM | #3 |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 5,009
|
Get these:
https://www.amazon.com/Seven-Sparta-...49903393&psc=1 or a couple sets of these: https://www.amazon.com/2-Pack-Rubber...05582093&psc=1 |
02-26-2019, 06:07 AM | #4 |
Drives: No Camaro :( Join Date: Apr 2013
Location: Chitown Burbs
Posts: 1,140
|
Picked up some rubber jack covers from Harbor Freight recently. Try them is you have a store locally. Stack wide scrape wood if you have enough for stability.
|
|
|
Post Reply
|
|
|