|
|
#1 |
![]() Drives: 2017 l4 blue 6speed Join Date: Oct 2016
Location: p.a
Posts: 199
|
19in rim sizing for 305 square setup ?need help
So on my lt1 car I had i installed coilovers and this frees up alot of room up front to go wider how wide? No idea ...
My last set of rims were str514 ? If I remember right Well they were 9.5 wide 18in 25 offset was a dope looking setup lowered 2inches Unfortunately they dont make that rim in a 19in ..... Fml...lol I would love to find a rim that has a dished look in 19in but i need offset measurements for 11in f/r probably 10wide in front for now sense this car is stock atm Car has brembos (upgraded to a 2ss ) I hate the 20in look ... Too big for my taste |
|
|
|
|
|
#2 |
![]() Drives: 17 1SS 6MT, 09 Tacoma TRD Sport Join Date: Nov 2017
Location: Colorado
Posts: 149
|
19X11 is perfect for running 305/30 19s.
Up front you will need an ET of around +8 or you will need to grind on your knuckle. Also it will poke, just use Z06 fender flares. I run +6 ET up front. Eventually I will put ZL1 fenders to get flush. If you don't want the hassle go with a 19X10 up front with a +20 or +15 ET. I like to maximize my track width, and I give no F***s about how it looks, if it's faster. Last edited by HyperspaceTurd; 06-23-2018 at 01:47 PM. Reason: FOR THE CHIRRENS! |
|
|
|
|
|
#3 |
![]() Drives: Really Fast Join Date: Aug 2017
Location: In The Woods
Posts: 238
|
HRE 540R. About $1100ea. Don’t know if that’s in the budget. You can get any size or offset you want.
__________________
THIS SPACE FOR RENT
|
|
|
|
|
|
#4 |
![]() Drives: 2017 l4 blue 6speed Join Date: Oct 2016
Location: p.a
Posts: 199
|
1100 a pop O_o dam i mean there 90% spot on but ****..... Lol
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|