Camber plates for 6th Gen found

Roostie · 10-12-2018, 09:36 PM

I found a source for 6th Gen camber plates: Ground Control. They've been around a while and have developed products for a lot of cars, so I would be happy to have their product on my car.
The cost is $499 and they make them for OE and smaller-diameter springs. The rep I talked to said you can get 3 degrees of negative camber with OE struts.
I'm interested because I've been wanting more than the two degrees I've got now. But, at $499 plus install plus alignment, it's a pricey proposition. I may wait for an Ohlins coilover system that I hope is forthcoming. But, I think a lot of Camaro owners would enjoy these plates

PolynesianPowerhouse · 10-12-2018, 10:07 PM

They're good

. Theres a local autox guy here that has been running em for about a year or so. I posted about em and the skyjacker setup they have for rear coilovers (may have been in the autox/road coirse forum). He uses the MCS coilover setup to complete the package.

Tay · 10-23-2018, 05:07 PM

Thats great news.

I don't see them on their website. Are they available to order yet?

rotis · 10-23-2018, 05:20 PM

The camber plates and weight jackers (to use race springs in the rear) have been available for over a year. I honestly have no idea why they haven't bothered to add them to their website.

I had them on my 2016 SS for almost two years. You can search my post history for notes/pics.

Tay · 10-23-2018, 11:44 PM

Quote:

Originally Posted by rotis

The camber plates and weight jackers (to use race springs in the rear) have been available for over a year. I honestly have no idea why they haven't bothered to add them to their website.

I had them on my 2016 SS for almost two years. You can search my post history for notes/pics.

Thanks rotis

10-12-2018, 09:36 PM	#1
Roostie all it takes is cash Drives: 2018 LS V6 1LE; 2000 BMW 540i 6MT Join Date: Jan 2017 Location: San Diego Posts: 375	Camber plates for 6th Gen found I found a source for 6th Gen camber plates: Ground Control. They've been around a while and have developed products for a lot of cars, so I would be happy to have their product on my car. The cost is $499 and they make them for OE and smaller-diameter springs. The rep I talked to said you can get 3 degrees of negative camber with OE struts. I'm interested because I've been wanting more than the two degrees I've got now. But, at $499 plus install plus alignment, it's a pricey proposition. I may wait for an Ohlins coilover system that I hope is forthcoming. But, I think a lot of Camaro owners would enjoy these plates

10-12-2018, 10:07 PM	#2
PolynesianPowerhouse Big Samoan ina little car Drives: 2016 camaro Join Date: May 2014 Location: Tofiga Island Posts: 1,872	They're good. Theres a local autox guy here that has been running em for about a year or so. I posted about em and the skyjacker setup they have for rear coilovers (may have been in the autox/road coirse forum). He uses the MCS coilover setup to complete the package. __________________ Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant

10-23-2018, 05:07 PM	#3
Tay Drives: 1985 Oldsmobuick Join Date: Oct 2012 Location: San Diego Posts: 206	Thats great news. I don't see them on their website. Are they available to order yet?

10-23-2018, 05:20 PM	#4
rotis Drives: 2019 ZL1 1LE Join Date: Sep 2010 Location: Bastrop, TX Posts: 446	The camber plates and weight jackers (to use race springs in the rear) have been available for over a year. I honestly have no idea why they haven't bothered to add them to their website. I had them on my 2016 SS for almost two years. You can search my post history for notes/pics.

User Name		Remember Me?
Password