[PICS]Stillen Body Kit and new Vossen Wheels!

AbsolutHank · 06-26-2016, 07:13 PM

Made a couple changes to the car over the last few weeks and wanted to post them here. I ordered in a set of Vossen VFS1 20x9/10.5 wheels from Need4Speed Motorsports here on Camaro6 in graphite. I'm running 255/40R20 and 295/35R20 Yokohama tires. I've almost always ran brighter finish wheels, so I wanted to try a little something different for my first set on the Camaro. However, I don't think the offsets are aggressive enough, and I think the front tire is a little too tall. I'll probably add some spacers all around and go down a size on the front tire. There is finally a coilover option for the Camaro, so I may be buying that soon and selling my GM Lowering Kit to get it even lower.

I also swapped out the front GM splitter and added a complete lower body kit from Stillen. I had it painted gloss black to match all the other pieces on the car. Again, its something I don't usually do, but felt like this car really needed a side skirt of some type. The pieces fit GREAT, and the install was quick. I had a buddy help me line up the long pieces and they stick in place with 3M tape. Then, you can screw into the underside of the rockers in pre-drilled holes for added strength. I couldn't be happier with the quality of these aftermarket parts - and they're currently on sale! Lemme know what you think!

MiamiBlueCamaro · 06-26-2016, 07:33 PM

.

Rob13567 · 06-26-2016, 10:42 PM

she looks great!

thebatmobile · 06-27-2016, 10:31 AM

How are the side rockers holding up against dust??? So many have recommended to by paint them black?

AbsolutHank · 06-27-2016, 11:20 AM

Quote:

Originally Posted by thebatmobile

How are the side rockers holding up against dust??? So many have recommended to by paint them black?

They get as dusty as the rest of the car I guess? I always detail spray wipe down after most drives anyways. I just couldn't envision them any other color on my car. Maybe if all the other plastic wasn't gloss black stock?

k818mn1 · 06-27-2016, 12:08 PM

Look great. Just needs some graphite hash marks!

Team STILLEN · 06-27-2016, 01:55 PM

Looking sharp! Can't wait to see what you do next!

ajp · 06-27-2016, 02:03 PM

How much lower than stock with the splitter and lowering kit?

KMPrenger · 06-28-2016, 12:54 PM

Looking great! Love the front splitter. Wish the side skirts didn't have the upward wing on the back of them.

oldman · 06-28-2016, 12:58 PM

tasteful.. very nice

EMTNLSS · 06-28-2016, 03:17 PM

Kit looks good. Thinking about getting it with the $94 off you can get with the code.

AbsolutHank · 06-28-2016, 04:18 PM

Quote:

Originally Posted by EMTNLSS

Kit looks good. Thinking about getting it with the $94 off you can get with the code.

I bought it a few days before the sale was offered, but was still in transit. I jokingly sent Joe @ Stillen a PM here asking if I could get credited back the $94, assuming it wouldn't happen. But a few days later, I got an email from PayPal with the refund...how awesome is that?!

shrubby · 06-29-2016, 05:02 PM

Can I ask what the sale price was vs. retail. I see the kit for $629. Is that the sale price?

shrubby · 06-29-2016, 05:03 PM

Never mind, found the post.

Thanks

06-26-2016, 07:13 PM	#1
AbsolutHank Drives: 2016 Corvette Z06 M6 Join Date: May 2009 Location: Odenton, MD Posts: 874	[PICS]Stillen Body Kit and new Vossen Wheels! Made a couple changes to the car over the last few weeks and wanted to post them here. I ordered in a set of Vossen VFS1 20x9/10.5 wheels from Need4Speed Motorsports here on Camaro6 in graphite. I'm running 255/40R20 and 295/35R20 Yokohama tires. I've almost always ran brighter finish wheels, so I wanted to try a little something different for my first set on the Camaro. However, I don't think the offsets are aggressive enough, and I think the front tire is a little too tall. I'll probably add some spacers all around and go down a size on the front tire. There is finally a coilover option for the Camaro, so I may be buying that soon and selling my GM Lowering Kit to get it even lower. I also swapped out the front GM splitter and added a complete lower body kit from Stillen. I had it painted gloss black to match all the other pieces on the car. Again, its something I don't usually do, but felt like this car really needed a side skirt of some type. The pieces fit GREAT, and the install was quick. I had a buddy help me line up the long pieces and they stick in place with 3M tape. Then, you can screw into the underside of the rockers in pre-drilled holes for added strength. I couldn't be happier with the quality of these aftermarket parts - and they're currently on sale! Lemme know what you think! __________________ 2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank *20/21 BC Forged Wheels : BC Coilovers: TA Aero*

06-26-2016, 07:33 PM	#2
MiamiBlueCamaro Drives: Gen 6 Camaro RS Join Date: Dec 2015 Location: Miami FL Posts: 1,725	. Attached Images

06-27-2016, 10:31 AM	#4
thebatmobile Drives: 2016 Camaro 2SS Join Date: Aug 2014 Location: Daytona Beach Posts: 123	How are the side rockers holding up against dust??? So many have recommended to by paint them black? __________________ 16 Summit White 2SS/20" Black Split Spoke Rims/NPP Exhaust/Red Calipers/White Knee Pads/Black Bow Ties, Spoiler & SV Mirrors

06-27-2016, 02:03 PM	#8
ajp 50th Anniversary Vert Drives: Camaro 2017 50th Anniversary Join Date: Jul 2009 Location: AZ Posts: 2,315 View My Garage	How much lower than stock with the splitter and lowering kit? __________________

06-28-2016, 12:54 PM	#9
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,957	Looking great! Love the front splitter. Wish the side skirts didn't have the upward wing on the back of them. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

06-26-2016, 10:42 PM	#3
Rob13567 Drives: 2016 camaro 2ss NGM Join Date: May 2015 Location: Georgia Posts: 342	she looks great!

06-27-2016, 12:08 PM	#6
k818mn1 Drives: 2016 Camaro SS, Garnet Red Join Date: May 2013 Location: Crowley, TX Posts: 350	Look great. Just needs some graphite hash marks!

06-27-2016, 01:55 PM	#7
Team STILLEN Drives: Varies Join Date: Dec 2009 Location: Costa Mesa, CA Posts: 2,182	Looking sharp! Can't wait to see what you do next!

06-28-2016, 12:58 PM	#10
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,325	tasteful.. very nice __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

06-28-2016, 03:17 PM	#11
EMTNLSS Drives: 2016 Hyper Blue 2SS Join Date: Feb 2016 Location: Layton, UT Posts: 498	Kit looks good. Thinking about getting it with the $94 off you can get with the code. __________________ 2SS Hyper Blue Metallic \| A8 \| Jet Black Interior \| NPP Exhaust Current Mods: Catch Can \| aFe Lowering Springs \| GM 2nd Gen Splitter \| Hotchkis Sway Bars \| MRR FS02 Wheels \| Flowmaster Exhaust \| Dark Tail Lights \| Diode Dynamics Sidemarkers \| Roto Fab \| Solar TB \| PRAY Ported IM \| BMR \| PRAY Tune Upcoming Mods:

06-29-2016, 05:02 PM	#13
shrubby Drives: 16' Black³ / 18' ZL1 1LE Join Date: Apr 2016 Location: Tacoma, WA Posts: 213	Can I ask what the sale price was vs. retail. I see the kit for $629. Is that the sale price? __________________ 16' Supercharged SS Black³ 18' ZL1 1LE Arctic Blue

06-29-2016, 05:03 PM	#14
shrubby Drives: 16' Black³ / 18' ZL1 1LE Join Date: Apr 2016 Location: Tacoma, WA Posts: 213	Never mind, found the post. Thanks __________________ 16' Supercharged SS Black³ 18' ZL1 1LE Arctic Blue

User Name		Remember Me?
Password