11-08-2022, 07:11 AM | #1 |
Drives: 2020 Camaro SS 1LE Join Date: Oct 2022
Location: Upstate SC
Posts: 30
|
C7 Brake Components
I'm changing vehicles from a C7 to an SS 1LE. The C7 was running Z06 rotors and calipers up front.
Am I correct to understand the SS1LE uses the same rotor size and pad shape as the C7 Z06? What about bolt pattern? I've got a set of Girodiscs I'd love to swap over, but I wasn't sure if I could, or if I'd have to swap to different hats. I've also got oem Z06 front and rear discs that would be nice to reuse if possible. |
11-08-2022, 01:14 PM | #2 |
Drives: 2020 Camaro SS 1LE Join Date: Apr 2022
Location: Miami
Posts: 227
|
ask in the 1LE forum
|
11-08-2022, 01:54 PM | #3 |
Drives: 2020 Camaro SS 1LE Join Date: Oct 2022
Location: Upstate SC
Posts: 30
|
To anyone who comes across this in the future-
I spoke with the folks at KNS Brakes and they informed me that it is not a direct swap if you have the Girodisc hats, and it's basically impossible to get just hats from Girodisc. If I understood correctly, if you used OEM hats, then you could transfer the rings over with a bolt kit. |
|
|
Post Reply
|
|
|