07-07-2017, 04:07 PM | #1 |
Drives: 2017 ZL1,2013 ZR1, 1952 C3100 Resto Join Date: Jun 2017
Location: Gibsonton, Fl
Posts: 168
|
Powerstop pad question
Can anyone who has these ceramic pads that work correctly that you are happy with please tell me the correct part numbers for both front and rear? The Z26 pad is what I am talking about. It seems that there is some question about the fronts. The rears seem to be 1053 but the fronts may be either 1405 or 1835. Just want to be sure we get the right ones. They have already sent us SS Camaro pads and they are wrong. Thanks for the help!!!!!!! John
__________________
2017 ZL1,Mosaic Black, auto,nav/pdr, Roto Fab,Mamo
2013 ZR1 60th Anniv. 1952 C3100 resto-rod. LS6, 4L60e, 228R cam |
07-07-2017, 05:07 PM | #2 |
Drives: 2017 Bright Yellow ZL1 6spd Join Date: May 2010
Location: Central MA
Posts: 646
|
The 1405 pads definitely are not the right pad. I have them in now. I have a set of the 1835 pads on the way for Monday. I'll compare them to the stock pad, when they get here.
__________________
2017 ZL1 Bright Yellow w/ black center stripe, 6 speed, CF gas door, PDR, Navi
|
07-07-2017, 05:09 PM | #3 |
Drives: 17 ZL1 Join Date: Mar 2017
Location: VA
Posts: 1,075
|
__________________
2017 ZL1 Coupe M6, Red Hot
Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp |
07-07-2017, 05:32 PM | #4 |
Drives: 2017 ZL1 A10, 2015 C7 Z51 Join Date: Aug 2011
Location: Atlanta, GA
Posts: 222
|
Wanting to know the correct setup too.
__________________
2017 Camaro ZL1 - Nightfall Gray Metallic - A10 - Roto-Fab intake
|
07-07-2017, 06:14 PM | #5 |
Drives: 2016 Z06, 2017 ZL1 Join Date: Feb 2012
Location: Las Vegas
Posts: 305
|
fronts are z26 1835 rears z26 1718
I have installed the rears and performance is just like stock with alot less dust. Fronts should be here wednesday and I'll install Thursday |
07-07-2017, 09:04 PM | #6 |
Drives: Camaro Join Date: Mar 2017
Location: Phoenix, AZ
Posts: 157
|
As I've said in the other 2 threads on Powerstop pads, the fronts are Z26-1835. They have match the stock pads so they sweep across the whole rotor.
The rears however are NOT the 1718s, while they technically "fit" the caliper they are too short and don't sweep the entire rotor down to the hat like the stock pads. I BELIEVE the Z26-1053 pads are what you need for the rears but I've yet to receive them in the mail to test with.
__________________
19 ZR1 | 16 Viper GT | 09 Z06 | 94 LS1 GT | 16 Denali | 19 CTS
http://www.gonicd.com |
07-07-2017, 09:50 PM | #7 | |
Drives: 2017 ZL1,2013 ZR1, 1952 C3100 Resto Join Date: Jun 2017
Location: Gibsonton, Fl
Posts: 168
|
Quote:
__________________
2017 ZL1,Mosaic Black, auto,nav/pdr, Roto Fab,Mamo
2013 ZR1 60th Anniv. 1952 C3100 resto-rod. LS6, 4L60e, 228R cam |
|
07-08-2017, 09:39 AM | #8 |
Drives: Camaro Join Date: Mar 2017
Location: Phoenix, AZ
Posts: 157
|
They just aren't aware that the 17 ZL1 has basically the same brake setup as the 16 CTS-V does.
__________________
19 ZR1 | 16 Viper GT | 09 Z06 | 94 LS1 GT | 16 Denali | 19 CTS
http://www.gonicd.com |
07-08-2017, 01:33 PM | #9 |
Drives: 2017 ZL1,2013 ZR1, 1952 C3100 Resto Join Date: Jun 2017
Location: Gibsonton, Fl
Posts: 168
|
I read on here in another thread that the brakes where the same as C7 Z06. When you look up those part numbers they are different from the CTS-V both front and rear. Confusing as to what is right.
__________________
2017 ZL1,Mosaic Black, auto,nav/pdr, Roto Fab,Mamo
2013 ZR1 60th Anniv. 1952 C3100 resto-rod. LS6, 4L60e, 228R cam |
07-08-2017, 03:27 PM | #10 |
Drives: Camaro Join Date: Mar 2017
Location: Phoenix, AZ
Posts: 157
|
I read that too and repeated it myself but then corrected it in one of the other threads. They are different.
__________________
19 ZR1 | 16 Viper GT | 09 Z06 | 94 LS1 GT | 16 Denali | 19 CTS
http://www.gonicd.com |
07-08-2017, 06:27 PM | #11 |
Drives: 2016 Z06, 2017 ZL1 Join Date: Feb 2012
Location: Las Vegas
Posts: 305
|
the front rotors are .8 of an inch larger than those on the z06. So no they arent the same
|
07-08-2017, 06:39 PM | #12 |
Drives: 2017 ZL1 M6 NFG Join Date: Jul 2017
Location: Bossier City, LA
Posts: 4
|
These are the OEM front pads.
|
07-08-2017, 10:44 PM | #13 |
Drives: 2017 ZL1,2013 ZR1, 1952 C3100 Resto Join Date: Jun 2017
Location: Gibsonton, Fl
Posts: 168
|
so the Z06 pads will probably fit but the pad area is much less. So stopping power will be less if you screw up and use that pad.
__________________
2017 ZL1,Mosaic Black, auto,nav/pdr, Roto Fab,Mamo
2013 ZR1 60th Anniv. 1952 C3100 resto-rod. LS6, 4L60e, 228R cam |
07-14-2017, 11:19 AM | #14 |
Drives: Camaro Join Date: Mar 2017
Location: Phoenix, AZ
Posts: 157
|
So the rear Z26-1053 pads finally showed up yesterday and they look to be the correct ones but I won't know for sure until I put them in this weekend. I did take a picture of the 1053 next to the 1718 just to show the difference between the two. While the 1718 technically fits in the caliper it's NOT the correct pad for the rear of these cars because it is physically shorter top to bottom. The 1053 looks like it matches the dimensions of the stock rear pads.
1053 on the left and 1718 on the right, don't have a picture of the stock pad on hand.
__________________
19 ZR1 | 16 Viper GT | 09 Z06 | 94 LS1 GT | 16 Denali | 19 CTS
http://www.gonicd.com |
|
|
Post Reply
|
|
|