![]() |
#1 |
![]() |
ZL1 Fuel Rail Pressure
What is an acceptable fuel rail pressure at wot for a zl1.I'm getting 2600 on e40 with headers,ported SP,103 TB and aux low side. low side stays steady in the 80's
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,885
|
Its usually closer to 2900, but take a look at your commanded rail pressure. Make sure the actual pressure is the same as commanded.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
![]() |
![]() |
![]() |
#3 |
![]() |
|
![]() |
![]() |
![]() |
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,885
|
What is your injector open time?
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
![]() |
![]() |
![]() |
#5 |
![]() |
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,885
|
You’re out of steam... push the car much harder (more HP or more E) and you’ll get to buy a new rotating assembly for yourself as an early Christmas present!
![]()
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
![]() |
![]() |
|
|
Post Reply
|
|
|