07-13-2023, 03:21 PM | #1 |
Drives: 1959 Impala Join Date: Jul 2023
Location: Guelph, Ontario
Posts: 4
|
2022 Fuel pump control module
Can someone help with where the FPCM is located on a 2022 ZL1? It looks like in the previous years it was inside behind the passenger seat.
Thanks in advance, |
07-13-2023, 03:24 PM | #2 |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 450
|
No man, that may have been the SS, but not the ZL1 as far as I know, and I have a 17 so I couldn't see why they would move inside and outside in between the years from my time 'til now. It's located down by the diff. on the drivers side.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ |
07-14-2023, 06:49 AM | #3 |
Drives: 1959 Impala Join Date: Jul 2023
Location: Guelph, Ontario
Posts: 4
|
Thank you! I did find a picture that looked like the diff was close by but it was hard to tell for sure.
Would you also be able to tell me where the fuel pressure sensor is? |
07-14-2023, 12:53 PM | #4 |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 450
|
The fuel pressure sensor if I remember right is on top of the tank itself, though I could be thinking of the Vette and could be wrong. What is it exactly that you are trying to accomplish?
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ |
07-14-2023, 01:59 PM | #5 |
Drives: 1959 Impala Join Date: Jul 2023
Location: Guelph, Ontario
Posts: 4
|
I bought the drivetrain from an unfortunately wrecked 2022 ZL1. I’ve asked for the FPCM, pressure sensor and pump to aid in the swap. He’s having a hard time locating the FPCM and sensor.
|
07-14-2023, 02:47 PM | #6 |
Drives: 2023 Camaro 1LE Sharkskin Join Date: Sep 2022
Location: Illinois
Posts: 2
|
Fuel Pressure Sensor for Tank -
Fuel Flow Control Module (Mounted on Outside of Tank) |
07-14-2023, 04:58 PM | #7 |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 450
|
And there you have it OP. Exactly where I said they would be.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ |
|
|
Post Reply
|
|
|