2026 Gen. V LT Engine CAMSHAFT SHOOTOUT

SOCAL.M6.ZLE · 04-14-2026, 02:32 PM

Got a Gen.V LT engine?
Ever asked which cam is best for my build?

Then your not going to want to miss this...

During the first week of May... Justin White Tuned, Flag Motorsports, and I, will be conducting an old school "back to back" camshaft shootout.

Over a 5 day period at the famous Westech DYNO Facility, we will bolt up an LT4 engine and progressively work our way up from bone stock to spicy bolt on combo with ported heads, KONG ported blower before we start testing 8-10 camshafts.

That is where we need YOUR HELP, in nominating, suggesting or sharing a CAM for us to test. We only have 4 slots still left open so nominate quickly.

Special thanks to the 15+ sponsors shown below... without your generosity and support, this test would still be a dream!

If you wanna keep up on the progress, nominate a cam, see cams being tested, taken a donation, find links to the project sponsor podcasts, VLOGS and more... visit the webpage HERE.

It's about to go down!

SOCAL.M6.ZLE · 04-14-2026, 10:55 PM

Good news... just received confirmation that we will be showcasing a brand new series of cam from BTR in the test!!! Stay tuned for more details...

BradM · 04-15-2026, 09:17 AM

Awesome, can't wait to see the results!

SOCAL.M6.ZLE · 04-15-2026, 11:04 AM

Same here buddy... Super excited to see the dyno overlays on 8-10 cams on the same engine! I think this is going to really help people decide which cam is best for my build!

KingLT1 · 04-16-2026, 09:00 AM

SOCAL.M6.ZLE · 04-23-2026, 12:06 AM

Hey guys... lots going on with this project... securing most of the cams now, but reluctant to announce until I have them "in hand"... but, in order to build some interest... we have our first cam "locked in"... A custom grind from our friend Rick Crawford Racing... like some of the cams we are testing, specs will be somewhat hidden for the duration of the testing... let's just say this one will be spicy for sure!

Big news coming next week from a few other participants. Stay tuned

SomeGeoffGuy · 04-28-2026, 11:27 AM

Be nice to see a good mix, and not just monstrous high RPM giant lift thumpers. Going to be pretty cool regardless!

-Geoff

SOCAL.M6.ZLE · 04-28-2026, 02:05 PM

Quote:

Originally Posted by SomeGeoffGuy

Be nice to see a good mix, and not just monstrous high RPM giant lift thumpers. Going to be pretty cool regardless!

-Geoff

Yes sir, we will be testing from mild to wild... so everyone can see how each responds on the same motor... results should be VERY eye opening

Green82 · 04-28-2026, 03:54 PM

need to do a test with a LT1 motor

SS_Don · 04-28-2026, 04:35 PM

Quote:

Originally Posted by Green82

need to do a test with a LT1 motor

+1

Ray3768 · 04-28-2026, 04:38 PM

I agree with the above posters, let's see an LT1 comparison as well.

-Ray

SOCAL.M6.ZLE · 04-28-2026, 06:10 PM

Ye sir, we have been discussing that, as well as a 416/2650 test depending on how well this one does...

04-14-2026, 02:32 PM	#1
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,178	2026 Gen. V LT Engine CAMSHAFT SHOOTOUT Got a Gen.V LT engine? Ever asked which cam is best for my build? Then your not going to want to miss this... During the first week of May... Justin White Tuned, Flag Motorsports, and I, will be conducting an old school "back to back" camshaft shootout. Over a 5 day period at the famous Westech DYNO Facility, we will bolt up an LT4 engine and progressively work our way up from bone stock to spicy bolt on combo with ported heads, KONG ported blower before we start testing 8-10 camshafts. That is where we need YOUR HELP, in nominating, suggesting or sharing a CAM for us to test. We only have 4 slots still left open so nominate quickly. Special thanks to the 15+ sponsors shown below... without your generosity and support, this test would still be a dream! If you wanna keep up on the progress, nominate a cam, see cams being tested, taken a donation, find links to the project sponsor podcasts, VLOGS and more... visit the webpage HERE. It's about to go down! Attached Images __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi Last edited by SOCAL.M6.ZLE; 04-14-2026 at 10:55 PM.

04-14-2026, 10:55 PM	#2
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,178	Good news... just received confirmation that we will be showcasing a brand new series of cam from BTR in the test!!! Stay tuned for more details... __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi

04-15-2026, 11:04 AM	#4
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,178	Same here buddy... Super excited to see the dyno overlays on 8-10 cams on the same engine! I think this is going to really help people decide which cam is best for my build! __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi

04-16-2026, 09:00 AM	#5
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 7,641	__________________ 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel

04-23-2026, 12:06 AM	#6
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,178	Hey guys... lots going on with this project... securing most of the cams now, but reluctant to announce until I have them "in hand"... but, in order to build some interest... we have our first cam "locked in"... A custom grind from our friend Rick Crawford Racing... like some of the cams we are testing, specs will be somewhat hidden for the duration of the testing... let's just say this one will be spicy for sure! Big news coming next week from a few other participants. Stay tuned Attached Images __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi

04-15-2026, 09:17 AM	#3
BradM Drives: looking for a 5th gen Join Date: Jan 2026 Location: Sherman, Tx Posts: 3	Awesome, can't wait to see the results!

04-28-2026, 11:27 AM	#7
SomeGeoffGuy Drives: 2023 2SS Convertible Join Date: May 2009 Location: Metro Detroit Posts: 1,202	Be nice to see a good mix, and not just monstrous high RPM giant lift thumpers. Going to be pretty cool regardless! -Geoff __________________ '12 2SS RS Convertible - Traded in. '16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange.

04-28-2026, 03:54 PM	#9
Green82 Drives: 2022 camaro 2SS Join Date: Apr 2023 Location: Oklahoma Posts: 201	need to do a test with a LT1 motor

04-28-2026, 04:38 PM	#11
Ray3768 Drives: 1977 Trans Am, 2024 Camaro 2SS Join Date: Apr 2023 Location: NJ Posts: 169	I agree with the above posters, let's see an LT1 comparison as well. -Ray

04-28-2026, 06:10 PM	#12
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,178	Ye sir, we have been discussing that, as well as a 416/2650 test depending on how well this one does... __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi

User Name		Remember Me?
Password