You are browsing camaro6 
01-26-2022, 11:05 PM
|
#1 |
 Drives: Chevrolet Camaro LT1 Join Date: Jan 2022
Location: CA
Posts: 2
|
Can MBRP axle back's be welded?
Hey everyone, I have a 2021 camaro lt1, and I had kooks bullet mufflers placed last month. It drones way too much for my liking so I'm looking at MBRP. Since my stock pipes were cut, I'm not sure if the MBRP will be long enough to reach and slide over the pipes since they were cut. Are MBRP axle back's able to be welded on or are they more of a slide on system only?
|
|
|
|
01-27-2022, 07:07 AM
|
#2 | |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,196
|
Quote:
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
01-27-2022, 08:27 AM
|
#3 |
       Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 2,243
|
Unless the MBRP has a J pipe or one of their resonators Id go with post #2s recommendation of AWE or Corsa, or Borla. Their all slip fit but you may indeed be too short however your pipes had been cut so you may be in for a muffler shop trip to get it welded up.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
