You are browsing camaro6 
09-01-2021, 02:48 AM
|
#1 |
|
Red Bull
Drives: 2017 Chevy ZL1 Join Date: Dec 2020
Location: Evansville, IN
Posts: 186
|
Tire Pressure
I just installed a set of S71 Welds with 305/45 17 Mickey ET street R. What tire pressure are you running them at the track? I still have the stock fronts for now.
|
|
|
|
09-01-2021, 12:07 PM
|
#2 |
 
Drives: 2018 ZL1 A10 NFG 2019 COPO 350 SC Join Date: Feb 2018
Location: Woodbine Md
Posts: 686
|
I ran between 16-18lbs in these tires with good success... depending on your power level start high and work your way down.
__________________
2019 COPO #32
350 SC 8.25 167MPH 2018 ZL1-NFG-A10 388CI L8T 9.32 147MPH |
|
|
|
|
09-01-2021, 01:27 PM
|
#3 |
 
Drives: 2021 ZL1 1LE Join Date: Aug 2010
Location: Fredericksburg, Virginia
Posts: 409
|
18psi hot.
Last edited by Beescuz; 09-01-2021 at 07:25 PM. |
|
|
|
|
09-01-2021, 03:52 PM
|
#4 |
|
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
I couldn't get them to balance. Returned two sets. I hope they work out for you. Mine were 20"
__________________
2017 ZL1 M6 Silver Ice Metallic
|
|
|
|
|
09-01-2021, 04:28 PM
|
#5 |
 Drives: CMaro Join Date: Sep 2018
Location: South Texas
Posts: 101
|
18psi is the sweet spot
|
|
|
|
|
09-02-2021, 01:37 AM
|
#6 |
|
Red Bull
Drives: 2017 Chevy ZL1 Join Date: Dec 2020
Location: Evansville, IN
Posts: 186
|
Thanks for the input! I will start them at 16-17 cold. Mine are 17 inch on weld S71
|
|
|
|
|
09-02-2021, 09:20 AM
|
#7 |
|
Petro-sexual
|
All I know is running above 20-psi above 80-MPH makes for an interesting time above 80… Not in a fun way.
__________________
 '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
