You are browsing camaro6 
07-17-2021, 10:11 AM
|
#1 |
  
Drives: 2018 HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 886
|
Aem wideband install question
Just trying to figure out where to run the sensor wire thru the firewall. I've read there's a block off plate on the ss, I'd assume its the same on the zl1? Or there's the rubber boot where the main positive cable goes in. Thats all I see, any info and experience is appreciated
|
|
|
|
07-17-2021, 11:26 AM
|
#2 |
 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,238
|
If you look for the thread I have started I wrote up how I did it . I used the sound tube plate and drilled a hole and grommet. You have to depin the AEM connector to pass the wires thru the grommet.
Last edited by 20Bluezl1; 07-17-2021 at 11:40 AM. |
|
|
|
|
07-17-2021, 12:06 PM
|
#3 |
|
Drives: 2018 HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 886
|
Awesome, I actually already have those grommets for the jms wires in the trunk so that works perfect. Thanks!
Wasn't able to find your thread for some reason |
|
|
|
|
07-17-2021, 12:19 PM
|
#4 |
 
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,276
|
I did same as above. Nice pics
|
|
|
|
|
07-17-2021, 12:32 PM
|
#5 |
 Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
I did the same
__________________
2017 ZL1 M6 Silver Ice Metallic
|
|
|
|
|
08-03-2021, 01:13 PM
|
#6 |
|
Drives: 2018 HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 886
|
Thanks guys, worked perfect
|
|
|
|
|
08-03-2021, 08:27 PM
|
#7 |
|
Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 736
|
i have a ton of crap going into that hole and ended up opening it up a bit to fit various plugs through. I use black gorilla tape to cover it. No one notices lol
__________________
2016 Twin Turbo Camaro SS - 968hp/970tq 8.9@153
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
