You are browsing camaro6 
12-05-2019, 07:49 PM
|
#1 |
 Drives: 2020 Chevy Camaro Join Date: Oct 2019
Location: Quebec
Posts: 76
|
aftermarket stering wheel adapator
Anyone knows if there is something on the market to install an aftermarket steering wheel like a Sparco or OMP?
Can't find anything, are the splines the same design as the gen5? thanks |
|
|
|
12-05-2019, 10:06 PM
|
#2 |
 Drives: 2017 1SS Hyper Blue Join Date: Apr 2017
Location: Wisconsin
Posts: 479
|
What would you do about the airbag?
|
|
|
|
|
12-06-2019, 01:04 AM
|
#3 |
 Drives: 2018 1SS 1LE & 1973 Datsun 240Z Join Date: Sep 2015
Location: Ontario
Posts: 574
|
NRG makes an adapter. It fits the shaft but you have to mill out a pocket for the electrical connector on the clock spring. See my post on making a steering wheel extension...
https://www.camaro6.com/forums/showthread.php?t=534793 If you use an aftermarket wheel with no airbag, there are airbag bypasses (resistor and fuse) included with the adapter |
|
|
|
|
12-06-2019, 09:09 AM
|
#4 |
|
Drives: 2020 Chevy Camaro Join Date: Oct 2019
Location: Quebec
Posts: 76
|
thanks guys, we are building a race car so the air bags will all be removed. NRG it will be then, i was hoping for some Momo or Sparco adaptor but seems like NRG is the only one to make it. That is a lot of small splines for that shaft! Thanks for the link to your thread.
|
|
|
|
|
12-06-2019, 09:17 AM
|
#5 |
|
Drives: 2020 Chevy Camaro Join Date: Oct 2019
Location: Quebec
Posts: 76
|
thinking about it, we might use the weld in solution also, Lifeline makes a geat weld in quick release, i would have to see the size of the camaro steering shaft to see if it can be fitted. We will receive our car only in february.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
