|
|
#1 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
1st hit on the dyno.
First hit. I won't make my final #'s public until we hit our goals, but first pull at 17lbs of boost on 93. 864 hp. 105 degrees ambient temps (More like 115 inside the shop w/100% humidity) and on Sorians number killing Mustang dyno. If we can squeeze 950 to 1000 out of it on pump gas, I'll do cartwheels. We've lowered the manifold temps from 180 all the way down to 130. Which was the cause of it dying on the big end with the top mount blower. We have another full day of tuning and we are going to go ahead and pulley down so we can get 22lbs out of it. Not bad for the first hit. Again, on 93 pump. I think we'll hit my 1200 number on 116. I'll document each run as they come in. Don't blame me for the Non HD video. I didn't take it. haha.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
Last edited by kttxz06; 07-27-2018 at 08:33 AM. |
|
|
|
|
|
|
#2 |
|
Scientific negotiator
Drives: 2019 Grand Sport Join Date: Mar 2017
Location: Forsyth, GA
Posts: 873
|
DAAAAAANG!
I have got to get to work on mine. Very impressive progress bud...
__________________
2019 Grand Sport M7
2018 ZL1 1LE 6MT 2017 SS 1LE 6MT . Matthew 25:40 ΜΟΛΩΝ ΛΑβΕ |
|
|
|
|
|
#3 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
Quote:
Still have work to do, but we are about 90% there finally. One more day. One more day.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014
Location: Franklin WI
Posts: 6,634
|
GT500... ....come out to play-ay.
Very nice.
__________________
"the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - |
|
|
|
|
|
#5 |
|
Scientific negotiator
Drives: 2019 Grand Sport Join Date: Mar 2017
Location: Forsyth, GA
Posts: 873
|
|
|
|
|
|
|
#6 |
|
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
Stock.
|
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
__________________
2018 ZL1 1LE sw/PDR
|
|
|
|
|
|
#9 |
![]() ![]() ![]() Drives: 2017 ZL1 Join Date: Aug 2009
Location: Maryland
Posts: 1,052
|
By stock, do you mean stock bottom end? Or are you talking about a unopened motor? Either way...stout numbers for a first hit!
__________________
'17 ZL1 10.99@129 stock. 4225# raceweight. Best 60'- 1.66 on factory tires. 10.48@132 E50, intake and tune. 4270 lbs
https://youtu.be/EyHtdH9XOkY https://youtu.be/Lcu41obbTf8 '13 ZL1 BRM A6. 11.591 @ 119.2 factory stock with a 1.68 60'! Best stock mph 121.8. 11.29 @ 123 RotoFab, drag radials and skinnies. 4360# raceweight. http://youtu.be/yggIA3C_kkA 2014... back to stock http://youtu.be/spQLaTWbThs 2013... stock & RotoFab |
|
|
|
|
|
#10 |
![]() ![]() ![]() Drives: 2015 Z/28, 2007 HHR Join Date: Jan 2014
Location: Republic of Texas
Posts: 1,168
|
|
|
|
|
|
|
#11 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
Quote:
Something like that. But yes, stock bottom end. The motor technically has been opened. Cam, some other internals have been done. Lifters, Valve Springs. Some other shit has been done. We won't take the motor out until Sept to build the bottom end. At that point, we are going 416 w/built internals, w/a 200 shot.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
|
#12 |
|
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,354
|
Badazz build Scott,
I'd like to see what it would do for grins against a Mclaren 720 on 93(not c16 something that's doable for the average joe lol).. no meth either.. Seems like that car is the roll race king.. I want to build towards that goal since they are all over houston. They walk away from the new ZR1, Demon, Supercharged Huracan, I think I saw a video were it did a 9.92 in the 1/4 at 145 on stock tires no mods and I haven't seen it lose a roll race yet either. I know I would never be allowed to park next to the Supercar at coffee and cars Memorial City.. But when we all leave and a 720 got his ass whooped that would be badass!
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
|
|
|
|
#13 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
Quote:
Thank man, appreciate it. There is now way on the streets or on any roll race I'm eliminating any one of my advantages. I have to run meth, it's part of my build dude. haha. Same thing with C16. If I know I have a $ race lined up, I'm going full kill. But just out and about, yea, I'll be on pump gas. I don't know anyone with a 720 so. I'm not going to get too far out there. This build is going to be sick yes, but not sure where my place is in the pecking order is going to be, but we will find out. I'm meeting with a buddy of mine who has a Powerfab built Zl1. He's 780 to the wheels. We are going to run for fun to see how bad I pull on em. Then, I still have 2 re-matches against a Z06 and a Coyote who laid it on me last time I went out. Nobody that I run with has any clue I'm building the car so. (The 900+ guys). But I am with you, I should be pretty stout on a roll race that's for sure. I'm still on a 20" DR so. After this, I'm going to get a 17" drag set up on the rear, but I still think these MT Streets will hold on the street. I added all the BMR stuff to keep if from feeling so floaty on the hit. We'll see if that was worth the investment.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
|
#14 |
![]() Drives: 2017 ZL1 Join Date: Mar 2014
Location: DFW, TX
Posts: 309
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|