You are browsing camaro6 
09-25-2017, 06:08 PM
|
#1 |
 Drives: 2016 2SS Hyper Blue Join Date: Sep 2016
Location: NY
Posts: 86
|
Air in braking system
So I was bleeding my brakes with a motive pressure bleeder and screwed up. I let the master run dry and got air in the system. I then redid it until no air came out of any of the bleeders, but the pedal still goes almost to the floor. I know there is still air in there somewhere. How do I fix this? Stock SS brakes btw
|
|
|
|
09-25-2017, 09:09 PM
|
#2 |
|
Drives: 2017 1ss Join Date: Jan 2017
Location: cincinnati ohio
Posts: 68
|
Often with some of the newer cars you have to have a tool that will allow the abs to "pump " to remove taped air in the abs module. I can not say for absolute if this cars have that but if you have already tried to bleed all the lines again ..... after bleeding the master cylinder then I would guess that to be the issue .
|
|
|
|
|
09-25-2017, 09:48 PM
|
#3 |
        Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
It will have to go to the dealer now, the ABS pump has to be cycled to get the air of the solenoids.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
