02-04-2017, 02:57 PM | #1 |
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Installed Strut Tower Brace Today
Always liked this brace on our Gen 5 1LE, and know that the Gen 6's stiffness makes it somewhat redundant, but damn it just looks cool ...Probably just 4 lbs or so too.
Last edited by bub; 02-04-2017 at 06:03 PM. |
02-04-2017, 03:06 PM | #2 |
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Here's what the mounting boss looks like:
|
02-04-2017, 03:08 PM | #3 |
Drives: 1LE Join Date: Dec 2016
Location: Iowa
Posts: 124
|
Looks great. Go ahead and get a catch can on that thing;}
|
02-04-2017, 03:27 PM | #4 |
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Just a note to supplement the instructions, the strut cap screws on the 1LE do have the captive washers referenced on the instruction sheet, so they do get torqued to 30 Nm (not 22 Nm).
|
02-04-2017, 05:15 PM | #5 |
Rockcrusher
Drives: 2017 SS 1LE Join Date: May 2009
Location: Spring Hill FL
Posts: 425
|
Notice and difference in handling/turn in?
|
02-04-2017, 06:02 PM | #6 |
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Naw, not really, but haven't really pushed it. Also running the winter A/S tires and rims right now vs. the stock sticky Goodyears.
|
|
|
Post Reply
|
|
|