You are browsing camaro6 
09-12-2016, 12:52 PM
|
#1 |
  
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Trap RPM
Does anybody know the RPM is going thru the beams on the big end. Judging from all the videos ive watched it seems like it goes deep into 4th gear. Trying to decide on a tire diameter (drag radial) it seems every half inch in diameter is approx 100 rpms in 4th.
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray Last edited by JFM-jr; 09-12-2016 at 01:36 PM. |
|
|
|
09-12-2016, 06:58 PM
|
#2 |
   Drives: 2017 Camaro 1SS Join Date: Aug 2016
Location: NH
Posts: 1,708
|
Tried my stock A8 once so far, using track mode with shifter in 'D', and it shifted to 5th near the traps.
|
|
|
|
|
09-13-2016, 09:03 PM
|
#3 |
Drives: '16 2SS / '05 SRT10 Ram / '65 bu Join Date: Dec 2015
Location: Philthy
Posts: 978
|
I run 305/35 DR and it shifts into 5th every time just at the line, 6200 rpm. +/- 100.
__________________
H/C SBE 9.80@140 powered by Texas Speed
|
|
|
|
|
09-13-2016, 09:50 PM
|
#4 | |
|
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Quote:
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray |
|
|
|
|
|
09-13-2016, 09:57 PM
|
#5 |
|
Drives: '16 2SS / '05 SRT10 Ram / '65 bu Join Date: Dec 2015
Location: Philthy
Posts: 978
|
Yes
__________________
H/C SBE 9.80@140 powered by Texas Speed
|
|
|
|
|
09-14-2016, 09:30 AM
|
#6 |
|
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Wow thats a 28.5" tire, at 6200 i wonder if you would have been better off locking it into 4th and just letting it tongue hang out thru the stripes ?
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray |
|
|
|
|
09-14-2016, 09:52 AM
|
#7 |
|
Drives: '16 2SS / '05 SRT10 Ram / '65 bu Join Date: Dec 2015
Location: Philthy
Posts: 978
|
I thought about doing that and I PM'd a couple guys to see what their thoughts were on it. If the trans shifted sloppy then it would be a no brainer, but after 6k+ the car really stops pulling imo.
It happens with such frequency that when I do eventually nip the line in 4th, I'll know I made a quicker pass..lol.
__________________
H/C SBE 9.80@140 powered by Texas Speed
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
