Looking into 3.91's - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

NC_SS · 04-20-2015, 10:22 AM

I'm about an hour or so north of Charlotte. Tax returns should be back next month, and I'm wondering if any of you know any good speed shops to swap in 3.91's?

Also someone reasonably priced, I've read guys who got quoted $1200-1500 to just swap in gears.

blakjak55 · 04-20-2015, 10:33 AM

PCM of NC? Think they're in your neck of the woods.

NC_SS · 04-20-2015, 10:39 AM

Quote:

Originally Posted by blakjak55

PCM of NC? Think they're in your neck of the woods.

I knew they are a good shop, I just wasn't sure they did gear swaps

They turned me down for putting on my potential axle back and told me to go to a good local exhaust shop.

nancygrl · 04-20-2015, 01:34 PM

Quote:

Originally Posted by NC_SS

I knew they are a good shop, I just wasn't sure they did gear swaps

They turned me down for putting on my potential axle back and told me to go to a good local exhaust shop.

Either too jammed with work and couldn't fit you in, or they'd have been to much more $$ and a good exhaust shop was probably the less expensive route to go on an axleback.

I usually work on my car myself, but when something is beyond my experience or lack of specialized tools/equipment, I'd consider these shops to work on my cars; SL Customs, JHR Performance, PCM of NC...They're all in Mooresville.

There's a place in Greensboro, Greensboro Speed. Don't have any personal experience with but I did meet the guy at the G'boro cars n coffee and got one of his cards.

CamaroKid300 · 05-06-2015, 06:07 PM

Quote:

Originally Posted by NC_SS

I knew they are a good shop, I just wasn't sure they did gear swaps

They turned me down for putting on my potential axle back and told me to go to a good local exhaust shop.

Yeah it was probably because they didn't have the time to do it to only make the $100-200 or they were just trying to save you money by going to an exhaust shop.

I was going to have MTI in ATL put on my cat back but they wanted an exorbitant amount until our ATL club had a dyno day there and they used it as a "demo" or whatever.

Chantro5 · 08-18-2016, 12:56 PM

I know this is an old thread, but any of you guys know if anywhere near the SC/NC border?

Dwright · 08-25-2016, 07:44 PM

Shift fast motorsports in rock hill sc. They are building my 408 ci right now. Great guys helped me out several times until 1 to 2 am in the morning

Dwright · 08-25-2016, 08:18 PM

FYI they also have an stc turbo there for a v6 Camaro

04-20-2015, 10:22 AM	#1
NC_SS Drives: 2012 M6 Camaro SS (RIP) Join Date: Nov 2014 Location: Virginia Posts: 1,684	Looking into 3.91's I'm about an hour or so north of Charlotte. Tax returns should be back next month, and I'm wondering if any of you know any good speed shops to swap in 3.91's? Also someone reasonably priced, I've read guys who got quoted $1200-1500 to just swap in gears.

04-20-2015, 10:33 AM	#2
blakjak55 drinks virgil's Drives: 2010 2SS M6 Join Date: Feb 2014 Location: Missouri Posts: 448	PCM of NC? Think they're in your neck of the woods. __________________ 2010 2SS/RS M6 - CAI Intake - Borla Stinger - VTC - 3.91's Eibach Sways - LG ZR28's - BMR Springs - 285/35 Squared

08-18-2016, 12:56 PM	#6
Chantro5 Drives: 2015 Dodge Challenger R/T Scat Pack Join Date: May 2016 Location: Greenville, SC Posts: 243	I know this is an old thread, but any of you guys know if anywhere near the SC/NC border? __________________ “It is not that I'm so smart. But I stay with the questions much longer.” ― Albert Einstein

08-25-2016, 07:44 PM	#7
Dwright Drives: 2011 Camaro 2ss Join Date: Dec 2015 Location: South Carolina Posts: 52 View My Garage	Shift fast motorsports in rock hill sc. They are building my 408 ci right now. Great guys helped me out several times until 1 to 2 am in the morning

08-25-2016, 08:18 PM	#8
Dwright Drives: 2011 Camaro 2ss Join Date: Dec 2015 Location: South Carolina Posts: 52 View My Garage	FYI they also have an stc turbo there for a v6 Camaro