07-28-2021, 03:12 PM | #1 |
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 89
|
AeroForce interceptor gauge and SMG A/C pod
New in box never used AeroForce interceptor gauge and SMG A/C vent pod. Sold
plus the ride.
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.49@ 144.04 MPH
Last edited by 18SS; 08-06-2021 at 06:53 PM. |
08-03-2021, 01:44 PM | #2 |
Drives: Blown C7 and 6th gen Join Date: Aug 2012
Location: NorCal
Posts: 428
|
Any pictures of the gauge? I am going E85 and looking for a gauge that will monitor Ethanol content. You wouldn't by chance have that sensor would you? Interested in display and face colors. I assume this is the gauge? Thanks for the info.
https://aeroforcetech.com/collection...et-camaro-2010
__________________
14 Corvette Z51 Coupe - 655RWHP
A&A Ti Blower, Alky Control Meth kit, Kooks LT setup, Corsa Catback, Full APR CF kit, RK Sports CF hood, hell CF everything LOL 17 Camaro 2SS 50th edition. TOTALED 6/2019 K&N Intake, MRBP axleback, Eibach kit, 20" Z28 wheels, smoked lights all the way around, Rockford Fosgate system 17 Camaro 2SS 50th edition. Round 2- 8/2019 550/600 RWHP, Magnuson TVS2300, Rotofab Intake, Corsa Xtreme, Air Lift P3 System, 20" Stance SF-07, smoked lights all the way around, Rockford Fosgate system. |
08-06-2021, 01:39 PM | #3 |
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 89
|
AeroForce
That’s the gauge. No sensor needed to watch E content.
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.49@ 144.04 MPH
|
08-06-2021, 04:11 PM | #4 |
Drives: Blown C7 and 6th gen Join Date: Aug 2012
Location: NorCal
Posts: 428
|
I'll take it. PM sent with my details bud. Thanks
__________________
14 Corvette Z51 Coupe - 655RWHP
A&A Ti Blower, Alky Control Meth kit, Kooks LT setup, Corsa Catback, Full APR CF kit, RK Sports CF hood, hell CF everything LOL 17 Camaro 2SS 50th edition. TOTALED 6/2019 K&N Intake, MRBP axleback, Eibach kit, 20" Z28 wheels, smoked lights all the way around, Rockford Fosgate system 17 Camaro 2SS 50th edition. Round 2- 8/2019 550/600 RWHP, Magnuson TVS2300, Rotofab Intake, Corsa Xtreme, Air Lift P3 System, 20" Stance SF-07, smoked lights all the way around, Rockford Fosgate system. |
08-06-2021, 06:54 PM | #5 |
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 89
|
Sold thanks Teddyca
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.49@ 144.04 MPH
|
08-11-2021, 06:47 PM | #6 |
Drives: Blown C7 and 6th gen Join Date: Aug 2012
Location: NorCal
Posts: 428
|
Exactly what I ordered and as described brand new. The vent pod sucks lol, but not because of 18SS. This was a good deal. I got home and it was sitting on my porch. Took me no more then an hour from start to finish. Gauge goes great with my AEM gauges. Thank you sir.
|
|
|
Post Reply
|
Thread Tools | |
|
|