[pwrmanpaul66]

Will a 315/35/20 on a 10 inch 35mm offset rims fit on stock suspension ?

[Mark114]

The 315/35/20 is a little wide for a 10 inch wheel and it is 1" taller than factory spec. I don't know if that could cause problems with your traction control if the fronts aren't close to the same diameter.

People report rubbing with 305/35 tires so you will probably have to relocate the driver's side wiring harness and then you still might have to use a spacer for clearance.

[warren3537]

Well I just found out yesterday that since I put on 285/35-20's the tire does in fact rub the liner when you turn either way, they do clear the strut tower but barely, I am running 20X10 +23 and I had to add a 3mm spacer to be double sure about the strut so now I plan on putting 275/35-20's on all four corners, don't get me wrong that I like the way the 285's do look good but I don't want create a problem down the road.

[CruzySS]

Originally Posted by warren3537

Well I just found out yesterday that since I put on 285/35-20's the tire does in fact rub the liner when you turn either way, they do clear the strut tower but barely, I am running 20X10 +23 and I had to add a 3mm spacer to be double sure about the strut so now I plan on putting 275/35-20's on all four corners, don't get me wrong that I like the way the 285's do look good but I don't want create a problem down the road.

It's the front that is rubbing not the rear?