[Lashu74]

I was cleaning the exterior of my windshield tonight and noticed the plastic bezel around the dic is not seated properly to the dash. Tried to push it in thinking it would clip in place but didn't want to go. I didn't want to force it too much was afraid I might break a plastic clip or something. Anyone have this issue? I'm assuming it's not normal but just wanted to double check before I take it to the dealer. Thanks for any feedback you can give me.

[hawk02]

Definitely not normal. This is how mine looks.

[cryssm]

There's a known issue with a gap forming on both sides, but I'm not sure I've seen it quite that bad. Here's mine:

[Lashu74]

Ok thanks for the reply guys gonna stop by the dealer tomorrow and see what they say.

[Lashu74]

Took it to the dealer today and the tech was able to force it back into place took a bit of doing he def pushed it harder then I ever would have. It eventfully locked into place. He said there are clips in there that can be replaced so if it came back undone he could order and replace the clip. They didn't have any of those type on hand. It was actually nice that I was able to walk in without an appointment and the tech and service manager came out to check it out and spent the time going over it and taking care of the issue. If your in the Lehigh Valley and need a good tech. and dealership that has a good service department check out Faulkner Chevy and ask for Jan to do your service work. He also did the 02 sensor when it through a CEL and handled the car like it should be. TJ the service manager also seems to be a stand up guy!

[cryssm]

Awesome, I'm glad it was an easy and quick fix!