CAMARO6 - View Single Post - HowTo: Changing Transmission Fluid [ZL1/SS M6 Tremec TR-6060]

SHE'Z 18 · 04-20-2021, 03:45 PM

Hey All,
I don't mean to beat this to death. But, can someone clarify / verify the required amount of fluid needed to do this flush and refill? The reason I ask is because the OP states in the (awesome) instructions that you'll need 3.65 qts. However, JCunningham (post 117) stated that it takes 5.2 Qts. I just want to make sure that I'm not missing something..

also, are you suppose to fill it, start / drive the car, then go back and check the fluid to see if any/some was consumed through the nooks/crannies?

Thanks everyone!!

04-20-2021, 03:45 PM	#131
SHE'Z 18 Drives: 18 ZL1 - M6 Join Date: Mar 2019 Location: MI Posts: 440	Hey All, I don't mean to beat this to death. But, can someone clarify / verify the required amount of fluid needed to do this flush and refill? The reason I ask is because the OP states in the (awesome) instructions that you'll need 3.65 qts. However, JCunningham (post 117) stated that it takes 5.2 Qts. I just want to make sure that I'm not missing something.. also, are you suppose to fill it, start / drive the car, then go back and check the fluid to see if any/some was consumed through the nooks/crannies? Thanks everyone!!