CAMARO6 - View Single Post - Hot start - slow crank

randypipe · 10-10-2021, 07:20 PM

The Bolt on the far left is the original bolt that I backed out from the water pump housing The bolt in the middle (AutoZone #006060 is the bolt that was shown a few pages back as the replacement bolt to be used to attach the 21"ground wire I bought. I don't know whether the packaging was mismarked or what, but this bolt will not work since the threads do not extend all the way to the head of bolt. The far right bolt (Autozone #006050) is the bolt that I ended up successfully using today on my 1le. Being that it is only 35mm long you will only be able to fit a washer and one nut not two. for a second nut you will need 40mm length. Hopefully this will fix the slow starter when hot, only time will tell.

10-10-2021, 07:20 PM	#259
randypipe Drives: Muscle Join Date: Nov 2015 Location: Sarasota Posts: 28	Starter Heat Soak Bolts The Bolt on the far left is the original bolt that I backed out from the water pump housing The bolt in the middle (AutoZone #006060 is the bolt that was shown a few pages back as the replacement bolt to be used to attach the 21"ground wire I bought. I don't know whether the packaging was mismarked or what, but this bolt will not work since the threads do not extend all the way to the head of bolt. The far right bolt (Autozone #006050) is the bolt that I ended up successfully using today on my 1le. Being that it is only 35mm long you will only be able to fit a washer and one nut not two. for a second nut you will need 40mm length. Hopefully this will fix the slow starter when hot, only time will tell. Attached Images