Quote:
Originally Posted by JSH
Someone here or on another thread today mentioned the danger associated with running less than 1/4 tank of fuel with DSX's low side fuel pump and Gen6's saddle style fuel tanks. I asked DSX about this and they said I shouldn't have a pressure problem unless the "low fuel light is on." Anyone know at what level the fuel light comes on?
|
My fuel light pops on at 9% - roughly 2 gallons.
The biggest problem I see with tapping the tank is running the tap in too far. I used a 9/16 drill bit - a little smaller than recommended. I ran the tap in a little ways and checked it. Kept doing that until I got the right depth. Oh yeah, DO NOT USE A WRENCH ON THE FITTING!!
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper
FIC+30%
DSX Flex fuel/Low side
NW 103mm TB/Roto-Fab CAI
Monster S Series
Elite E2-X
2" TSP LT's
BMR:BK063, BK060,TCA061, UTCA060, UTCA063
Weld Beadlocks/17" NT5R2