[TRUEOGRE2SS]

Originally Posted by busted_LT1

Hey everyone,

Does anyone know of a set of lowering springs that will allow me to run a 305/35/20 rear and 275/35/20 front with minimal rubbing issues? I know stock 305/35 is doable but I want to close up that wheel gap just a little bit more.

YES, BMR Suspension has front lowering springs, SP042 is the part number, I installed them on my 2019 2 SS Camaro, it will drop your front roughly 3/4", it wasn't hard but rather a time consuming process, but well worth doing it myself, saving quite a bit of money from having a shop install them.

I run a 275/35/20 front and 315/35/20 rear, and their is absolutely no rubbing in the front or rear what so ever, also i recommend relocating the wire harness in the left rear wheel housing when upgrading to a larger rear tire, you may not need to depending what size rim, offset/backspace you end up going with, just piece of mind knowing that your larger rear tire won't rub through your wheel liner and damage your harness, just search YOUTUBE on how to do it.

Hope this helps you out, good luck if you decide to lower the front.