Quote:
Originally Posted by kwav8r
You wouldn’t be able to twist it into the hole. It’s a tight fit due to the water pump.
|
I’m no expert on these, I have mine but have not attempted it since the car is still under covers. In the attached photos I have examples of what I was thinking, stuff I had here already. If you have or can get some of the oem plastic line used on the pvc systems you can warm it up with a heat gun and it will tightly fit and seal on a 5/16 hose barb. I have wuite abit here from installing Elite cans on several other Camaros and Corvettes, on LS engines
Your thoughts are welcome👍 Just looking for a cleaner install without the hose running close to the belt or pulley. Especially interested in what Elite’s thoughts are. Thanks
__________________
2019 Torch Red ZR1
2015 RED HOT 1LE (traded in)
2018 Garnet Red ZL1-1LE (traded in)
2018 Red Hot ZL1 A10 (traded in)
2015 Z/28 Red Hot w/ GM Wickerbill (traded in)
2009 Siverado 2500HD (Tows and Plows)
2010 Cadillac CTS (Wifes driver)
2004 Corvette Z06 Commemorative Edition (Wife’s car)
2014 Subie Outback (My driver)
Cushman Minute Misers and Scooter
Cushman Minute Miser used parts abundance
ASE Certified Master Mechanic
ASE Certified Master Collision Repair Technician