CAMARO6 - View Single Post - Maggie 2650 Build

NicKey · 05-09-2021, 07:58 PM

We have found that 6th Gen fuel systems both low and high can have some variance so both need to be properly monitored. 700 rwhp and 640 tq “ish” will be approaching the fuel limits for sure, but remember that all Dynos do not read exactly the same. A 90mm pulley will yield approx 15 lbs of boost / restriction peaking at 16 as the 2650 keeps on going, with the larger snout, throttle body, CAI and no cats.

Here is a thread with data on the old Magnuson 2300 as well as a similar 2650.

https://www.camaro6.com/forums/showt...ghlight=NicKey

05-09-2021, 07:58 PM	#15
NicKey Drives: Nickey Super Camaro Join Date: Nov 2008 Location: Loves Park, Illinois Posts: 1,668	We have found that 6th Gen fuel systems both low and high can have some variance so both need to be properly monitored. 700 rwhp and 640 tq “ish” will be approaching the fuel limits for sure, but remember that all Dynos do not read exactly the same. A 90mm pulley will yield approx 15 lbs of boost / restriction peaking at 16 as the 2650 keeps on going, with the larger snout, throttle body, CAI and no cats. Here is a thread with data on the old Magnuson 2300 as well as a similar 2650. https://www.camaro6.com/forums/showt...ghlight=NicKey Last edited by NicKey; 05-09-2021 at 08:18 PM.