Quote:
Originally Posted by Brudda*Termite
Ugh, looks like I might have to put mine on the quickjacks this weekend, the wife noticed a couple of oil drops on the floor of the garage. My oil pan had the same thing, not quite ready to drip yet. Any chance of the dipstick tube being a culprit?
|
I don't think so I think they just skipped tightening a few of them, mine was built in March 2017. If you just get under there you can reach up and feel if the screws are loose or not. Be careful when you tighten them up (aluminum threads) or use a torque wrench to 18 ft lbs (#2 in picture), back 2 screws to 106 in lbs (#3 in picture) follow the sequence, some bolts you really won't be able to get a torque wrench on unless you have good tools but do the best you can:
