[Joshinator99]

Originally Posted by MeanGreen1LE

Was researching heads and was positively influenced by your post. Found them on sale and could not resist!

Any hiccups with installing them? What pushrod length etc?

Thanks!

So far, so good. But between fuel limitations and a crap ton of tuning time into it, there’s no way I’ll realize their potential this year. But with very little boost (11psi), I’m at 90 lbs/min of airflow. With another 30% blower speed left on the table, I’d say these heads are damn efficient!

You’ll need to measure up your pushrods once you decide on a lifter and start putting things together. With the increased deck height, the pushrods will need to be longer for sure.