CAMARO6 - View Single Post - it is official... I have had a collapse!!

oldman · 07-23-2019, 11:08 AM

Would do a hot cam for the idle, but the really tight LSA and there is no fuel lobe ( I need the 38%) as my new target is 880 WHP uncorrected, well it was my target but now, with a sub .600 cam I may need to say 800 WHP, dunno. Everything else can flow enough and supply enough fuel. I may have to go to some hefty duration and .610.... Or just say I'm unlucky and the new lifters will not fail (no confidence).

07-23-2019, 11:08 AM	#9
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,316	Would do a hot cam for the idle, but the really tight LSA and there is no fuel lobe ( I need the 38%) as my new target is 880 WHP uncorrected, well it was my target but now, with a sub .600 cam I may need to say 800 WHP, dunno. Everything else can flow enough and supply enough fuel. I may have to go to some hefty duration and .610.... Or just say I'm unlucky and the new lifters will not fail (no confidence). __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.