Launching M6 on drag radials
Looking for some general advice on launching my Whippled M6 SS on M/T ET STREET R BIAS 28x11.5-17. Car makes 650hp to the tire, I have DSS axles and Gforce AL driveshaft, stock clutch.
Any suggestions for launch RPM? In the past on my street tire setup it was just a little RPM say 2500 and an even transfer of throttle and clutch, fighting wheel hop and tire spin. I am thinking I should be able to give it more RPM at the line and a quick smooth clutch release letting the tires do their thing?
Any advice for this setup would be appreciated.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80
Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft.
Tuned by EFX Tuning 688hp/632tq
Best 1/4 to date: 10.705 @ 131.92
|