CAMARO6 - View Single Post - Stock 18 SS with TVS2650

laynlo15 · 05-26-2020, 06:37 PM

As Mike remembers how critical it was on mine to relieve crank case ventilation but it doesn't have to be aftermarket. Just bigger hoses helps a lot back to the valve covers from GMs system and to the elbow on the TB to air box. I think the stock hoses are 3/8 and we went to 5/8s as he recommended. I know it doesn't sound like much but it does help relieve pressure especially when you go past 13-14 lbs. .

05-26-2020, 06:37 PM	#15
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	As Mike remembers how critical it was on mine to relieve crank case ventilation but it doesn't have to be aftermarket. Just bigger hoses helps a lot back to the valve covers from GMs system and to the elbow on the TB to air box. I think the stock hoses are 3/8 and we went to 5/8s as he recommended. I know it doesn't sound like much but it does help relieve pressure especially when you go past 13-14 lbs. . __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff