CAMARO6 - View Single Post

L98 Z28 · 07-30-2022, 03:14 PM

Did anyone ever try making a slot in the original regulator for the extra clip?

Nevermind. After taking the panel off my 2017, I found that it has the extra clip and slot in the regulator, but not the reinforcement for the spring.

The tab that gets pushed is on the side of the panel, not in the middle, and that creates torque. If I push in the middle of the sliding panel it easily opens, pushing on the tab makes it want to twist. That seems like another poor choice in this design.

07-30-2022, 03:14 PM	#106
L98 Z28 Drives: 2017 ZL1 6spd Convertible NFG Join Date: Jan 2017 Location: Melbourne, FL Posts: 109	Did anyone ever try making a slot in the original regulator for the extra clip? Nevermind. After taking the panel off my 2017, I found that it has the extra clip and slot in the regulator, but not the reinforcement for the spring. The tab that gets pushed is on the side of the panel, not in the middle, and that creates torque. If I push in the middle of the sliding panel it easily opens, pushing on the tab makes it want to twist. That seems like another poor choice in this design. Last edited by L98 Z28; 07-30-2022 at 03:52 PM.