CAMARO6 - View Single Post - Car idling slightly higher after new ported throttle body

ctrlz · 04-12-2021, 11:22 AM

Below is from the repair manual. It is in table form and lists hundreds of parameters. I quoted the column headers and the idle parameters:

SPECIFICATIONS > K20 ENGINE CONTROL MODULE: SCAN TOOL INFORMATION

Engine Control Module Scan Tool Data

1) Parameter; 2) System State; 3) Expected Value; 4) Description

1) Desired Idle Speed;

2) Engine Idling;

3) Approximately 650 RPM;

4) This parameter displays the
desired engine idle speed as
commanded by the control
module. The desired idle speed
varies depending on engine

load.

04-12-2021, 11:22 AM	#3
ctrlz Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016 Location: Ocean City, NJ Posts: 3,174	Below is from the repair manual. It is in table form and lists hundreds of parameters. I quoted the column headers and the idle parameters: SPECIFICATIONS > K20 ENGINE CONTROL MODULE: SCAN TOOL INFORMATION Engine Control Module Scan Tool Data 1) Parameter; 2) System State; 3) Expected Value; 4) Description 1) Desired Idle Speed; 2) Engine Idling; 3) Approximately 650 RPM; 4) This parameter displays the desired engine idle speed as commanded by the control module. The desired idle speed varies depending on engine load.