Quote:
Originally Posted by GunMetalGrey
I see, so the single adjustment bolt, which is only used to align the car, does not need to be discarded however if the two nuts and bolts that hold the strut to the knuckle were for some reason loosened and/or taken out (which I assume does not happen during alignment) GM calls for them to be discarded, correct?
|
The 2 large bolts that hold the front knuckle and strut together are reused. The front 'camber adjusting bolt' is just a 10mm bolt that can be temporarily used in the tapped hole of the knuckle to push the knuckle out while setting the camber. That bolt should obviously not be left in the knuckle, just keep it in your tool box when you're done.