Quote:
Originally Posted by rfm4000
Hows the ride? Im curious because of the calibration for the Magnet ride suspension was originally for 20s.
Also, how much did the tires cost?
|
I have not done more than pull out of my shop and run up and down the neighborhood plus a few hard brake events. I then put it back up on the lift and checked for rubbing. Of course, I won't know until next weekend's HPDE event, if there is any rubbing under full compression.
SEANBLURR, did you change front studs as I measure only a bit over 14mm of thread engagement on either wheel type (A1Y or A1Z)? ARP, etc. make replacements that have 12mm or more threads.
On the tires, I got them from Tire Rack - call Monty at X4496. The rates are online now from them.
Thanks to all for the compliments. They do look good. I like that they are low gloss black.