CAMARO6 - View Single Post - [SOLVED] Heated/ventilated seats, driver seat memory not working, door triple unlock

Jarek · 07-28-2021, 12:38 PM

Hello,
I have checked the module under the passenger's seat but (un)fortunately it was connected and without visible damage.
Attaching photos.
Seems that next step will be a bit more detailed diagnostic of SDM and BCM and re-flash.
Any other ideas?

BTW I have noticed that similar module under the driver's seat is missing the one plug (central one of the 3 plugs) but I assume that's by design, right?

07-28-2021, 12:38 PM	#21
Jarek Drives: 2017 2SS Convertible Join Date: Mar 2021 Location: Warsaw, Poland, EU Posts: 95	Hello, I have checked the module under the passenger's seat but (un)fortunately it was connected and without visible damage. Attaching photos. Seems that next step will be a bit more detailed diagnostic of SDM and BCM and re-flash. Any other ideas? BTW I have noticed that similar module under the driver's seat is missing the one plug (central one of the 3 plugs) but I assume that's by design, right? Attached Images __________________ Camaro SS 2017 Convertible, 2SS trim, V8 6.2L 455HP 618Nm, A8, Silver Mods so far: K&N oil air filter, rear lamps EU conversion with sequential turn signal, exhaust modification to 4 tips (non-NPP), LED rear fog light (EU requirement), side-markers conversion to LED Mods planned: Morimoto LED lamps set (front) Last edited by Jarek; 07-29-2021 at 03:05 AM.