Quote:
Originally Posted by 6ixrosario
Quick question, for anyone who's had the MRR MO17s, what size do you guy recommend running for a good look. I think the rims on the 1LE are 20s and was wanting that size. Any recommended sites you guys would use for ordering them. Im going to be doing a ZL1 1LE swap later, but for now just wanted a front splitter and side skirts and the MRR MO17 rims.
|
I'm running MRR M017, Front: 20x10 +23 off set, 275/35/20, w/BMR lowering springs, Rear: 20x11 +43 offset w/ 5mm wheel spacers, 315/35/20, I have a 1 finger gap from the top of tires front and rear to the fender lip, perfect gap, absolutely no rubbing whatsoever on front and rear,
If you decide to go bigger than 305 i highly recommend you relocate the harness in your left rear wheel well so the tire doesn't rub through liner and damage your harness, I attached 2 pic's, front and rear, showing gap of tires to fender lip, you'll have to rotate the pic's so you can see them in the correct orientation.
