CAMARO6 - View Single Post - Is track alignment possible on FE2 suspension? (LS and LT models)

juansheba05 · 03-15-2021, 01:22 PM

I was able to get -1.9 camber front and -1.6 camber rear without any camber plates.

I could tell the difference in autocross for sure.

Tire wear is not bad, I've put around 4k miles on stock all-season tires and there isn't any evident wear.

For autocross I run Re71-r 265/40/R19 all around and I wish I could get more negative camber but that's as far as the shop could go without messing toe too much.

03-15-2021, 01:22 PM	#5
juansheba05 Drives: 2017 V6 1LE Join Date: Apr 2018 Location: Michigan Posts: 13	I was able to get -1.9 camber front and -1.6 camber rear without any camber plates. I could tell the difference in autocross for sure. Tire wear is not bad, I've put around 4k miles on stock all-season tires and there isn't any evident wear. For autocross I run Re71-r 265/40/R19 all around and I wish I could get more negative camber but that's as far as the shop could go without messing toe too much.