View Single Post
Old 10-17-2019, 03:01 PM   #9
Rexpelagi
 
Drives: 2017 Camaro 2.0T 6MT
Join Date: Jul 2018
Location: Nashvegas, TN
Posts: 11
Quote:
Originally Posted by Move_Over View Post
I've had a few sets of MCS's on my E46's E90's and E36's, so yep the springs are real easy to change out. I noticed you had a 2.0t so my SS weighs a good bit more. What did these come off of, 2.0t or SS? I'm also on slicks, so can run a good bit stiffer springs.
The original owner used them on an SS car, and then I had them on my 2.0T car. I believe the front is a bit stiffer than the ZL1 1LE DSSVs, and the rear is a bit softer, for reference.

As mentioned, best rate will depend on a lot of factors, and may require testing, but this set should be very good as a starting point, and the springs are cheap standard parts that are very easily changed out.

Last edited by Rexpelagi; 10-17-2019 at 05:56 PM.
Rexpelagi is offline   Reply With Quote